How To Install Windows 7 On Netbook

OK, so hither's a guide to help those of yous wanting to install Windows 7 onto a Netbook without a DVD drive. Surprisingly, installing a more circuitous Bone like Windows 7 onto a Netbook seems to be far easier than a more than simple OS similar Windows XP.

There are a few tools effectually the net (including an official one from Microsoft) that can fix a Windows seven USB flash drive with most merely a single click, merely a lot of these tools don't seem to work for quite a few people for some reason (me included) -- so this guide is going to testify you how to exercise it the "one-time fashioned way" using a few uncomplicated control prompt commands.

If you wish to see a guide on how to install Windows XP onto a Netbook from a USB flash drive, delight expect here.

Right, let's become started:

[Center] Step 1..What y'all will need: [/CENTER]

one - A USB flash drive (must be 4gb minimum)

2 - A working computer with a working optical drive, a Windows 7 running Bone and administrator privileges (I'm non fully sure whether this method would work using Windows XP on the working computer, so it'due south best to employ Windows 7)

three - Your Windows vii DVD at the gear up

four - Your Netbook at the set

[CENTER] Stride 2..Prepare the USB flash drive with Control Prompt: [/Heart]

1 - Insert your USB wink drive into the working computer and be sure to remove any others that are not needed otherwise this could confuse the process.

two - Navigate to and open up a command prompt window: Click the START button, click 'All Programs', click 'Accessories', then right-click 'Command Prompt' and select 'Run as Administrator' (That'south important).

Alright, should wait a piffling like this...

[CENTER][/CENTER]

Moving on:

three - Now, in Command Prompt type DISKPART and press the 'Enter' primal (might take a few seconds for the reckoner to read all the disks).

iv - Now blazon LIST Deejay and press 'Enter'. It volition list what disk-drives you accept connected to the figurer and volition look something similar this...

[CENTER][/Middle]

five - Now we demand to know the number of the disk that is your flash bulldoze (number pregnant "Disk 0" or "Disk 1" etc.). Y'all will accept to figure out which is your flash bulldoze by looking at the "Size" column; A 4gb flash drive will take a size of roughly 3800mb, an 8gb will have a rough size of 7600mb. Once you have identified what disk your flash bulldoze is, move on the next step.

vi - OK, at present you must select your wink bulldoze in the list by typing like this: SELECT DISK ? --> (Supplant '?' with the number of your wink drive in the list - instance SELECT Deejay viii).

7 - Now we need to do a fiddling work on the wink bulldoze to set up information technology properly: follow these commands:

7a - Type CLEAN and press 'Enter'.

7b - Blazon CREATE PARTITION Chief and press 'Enter'.

7c - Type SELECT Division 1 and press 'Enter'.

7d - Type ACTIVE and press 'Enter'.

7e - Type FORMAT FS=NTFS and press 'Enter'.

7f - Wait for the format to cease.

7g - Type ASSIGN and press 'Enter'.

7h - Type EXIT and press 'Enter'.

8 - Now you can minimize the Command Prompt window and enter your Windows seven DVD into the DVD drive.

8a - At present you lot need to find out what bulldoze letter your DVD drive is (East, F, K ect). You tin find this out in 'MY Calculator'.

9 - OK, and then maximize Command Prompt again and type ?: CD BOOT --> (Supervene upon '?' with your DVD bulldoze letter - example K: CD BOOT) and press 'Enter' afterward.

9a - Blazon CD BOOT and press 'Enter'.

10 - Type BOOTSECT.EXE /NT60 ?: --> (Supervene upon '?' with the drive letter of your USB wink bulldoze, found out in 'My Figurer'). For example BOOTSECT.EXE /NT60 P: and press 'Enter'.

At present your Command Prompt screen should look something like this:

[Centre][/Centre]

You lot can now close the Command Prompt window.

[Heart] Step 3..Terminal Preparation: [/CENTER]

1 - Enter 'My Computer' and right-click on your Windows seven disc (in your DVD drive) and then click 'open'.

2 - Highlight all the contents and right-click 'copy'

3 - Enter your USB flash drive from 'My Computer' and 'paste' all the files from your Windows 7 disc into information technology.

four - When finished, safely remove your flash bulldoze from the computer and congratulate yourself because at present it'south set!

5 - But before you lot go rushing off: Plug the flash drive into the Netbook while it's off and so burn up your Netbook and enter the BIOS at the very offset (normally by pressing 'Delete')

5a - Navigate in your BIOS to your 'Boot Priority'.

5b - At present, you demand to switch the priority from the main hard drive to the USB flash drive (this should show up in the boot priority list every bit 'USB MOAI' or maybe some other name. If your USB flash drive is definitely not in that location, bank check it'south plugged in right and check the 'Difficult Drives' section of the BIOS to run into if information technology's listed in at that place. If so, move it upwardly to the 1st in line, then bank check your boot priority to see if information technology's there.

5c - When the USB is the 1st boot option y'all can restart your Netbook and brainstorm the installation process of Windows 7!

That's most it. Don't forget to alter your boot options back afterwards you've completed the install.

Relish

Source: https://www.techspot.com/community/topics/how-to-install-windows-7-on-a-netbook-using-a-usb-flash-drive.183072/

Posted by: klingtabounce1940.blogspot.com

Share this post